All Products
Full Lug End Double Offset Carbon Steel Two Eccentric Butterfly Valve 600LB 8”
Introduction of Double Excentric High Performance Butterfly Valve
TEKO Wafer and Lug Type high performance butterfly valve are double excentric high performance design. The unique design makes the disc move back and away from the body seat during the opening mo..
$0.00
Ex Tax:$0.00
API 6D Through Conduit High Pressure Self-tightening Slab Expanding Gate Valve For Natural Gas
TEKO INDUSTRY produces a full range of through conduit gate valves for production, processing and transmission applications.
Through conduit gate valves provides superior bubble tight sealing capabilities in gas services and unmatched ro..
$0.00
Ex Tax:$0.00
Bi-directional Seal NR Elastomer Seat Demanding Slurry Knife Valve For Slurry Applications
Specifications & Standards
Size Range
DN50~600mm
Design
Mill Standard
Pressure rating
150 psi(10 bar)
Face to face
MSS-SP-81
Body Style
Two-piece bolted
Drilling
ASME B16.5 CL150
..
$0.00
Ex Tax:$0.00
Bevel Gear Operation Uni-directional Seal Soft Seateds Knife Gate Valve For Sewage
Introduction
The TEKO knife gate is a uni-directional seal wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shutoff on suspended solids in industries such as:
Pulp and Pap..
$0.00
Ex Tax:$0.00
Bevel Gear Operated Large Diameter Knife Gate Valve Fabricated Carbon Steel Body
TEKO Valve manufactures the knife valve sizes up to 80" for large-diameter pipeline installations. Large Series valves are constructed similarly to smaller valves but feature a fabricated carbon steel body as opposed to cast iron. All wetted parts of the valve are sti..
$0.00
Ex Tax:$0.00
ASTM A216 GR WCB Wedge Gate Valve For WOG Flange Weld End
About Gate Valve
The gate valves are used as the closing valves for:
-noncorrosive fluids
-saturated steam
-oil
-air
- petroleum and petroleum products
The TEKO gate valves are designed as per ASME B16.34
Ambient temperature from -50℃ to 50℃
Application in other wor..
$0.00
Ex Tax:$0.00
API 609 Double Flanged Type Soft Seated Butterfly Valves For Shu-offf And Throttling Applications
Technical Data
Nominal diameter
DN2200 – DN3200 (mm)
88’’ – 128’’ (inch)
Nominal pressure
PN2.5/PN6/PN10/PN16
Standards
Design: BS EN593 / GB/T12238
Face to face: BS EN558 / GB/T12221
Flang..
$0.00
Ex Tax:$0.00
ANSI Standard API certificated Wedge Gate Valve With Electrtic Actuator
Constructive and functional characteristics
type: bolted bonnet, outside screw and yoke
flexible wedge
rising stem with top sealing (backseat)
full bore
flanged ends
shutting-off: by rotating the handwheel in clockwise direction
mounting position: any
Execut..
$0.00
Ex Tax:$0.00
Compressed Air Actuated Aluminum Body Hose Slurry Pinch Valve For Longtime Service
Product Review
Bi-directional seal, light weight, air operated pinch valves. Our TEKO air pinch valve’s sleeve is compressed by air or fluid pressure from outside. So the closing pressure must exceed the pipeline pressure to achieve the seal..
$0.00
Ex Tax:$0.00
Abrasion-resistant Sand Dredge Pump, Sand Suction Dredge Pump, Sand Pump
Advantages:
1.Horizontal centrifugal sand slurry pump, widely used for small river, lake, pond, pool, etc. sand suction or uploading sand from large dredger.
2. Can be completed with diesel engine or electric engine to work, upon requests.
3. Small size makes it easy to tran..
$0.00
Ex Tax:$0.00
Forged Steel A105 API6D Worm Gear Operated Fully Welded Ball Valve For Oil & Gas
The TEKO fully welded ball valve gives it maximum strength at minimum weight as well as maximum resistance both to pipeline pressures and stresses. The compact, spherical design also eliminates body flanges, thus reducing overall size and leak paths.
&nbs..
$0.00
Ex Tax:$0.00
Ductile Iron Uniform Wear Cord Fabric Enhanced Manual Rubber Pinch Valve
About Pinch Valve
The sealing in pinch valves is achieved throttling the flexible tube of the valve named elastic sleeve which is the only part in contact with the medium.
Pinch valves are suitable for handling slurries and solids in suspension, avoiding con..
$0.00
Ex Tax:$0.00
Pneumatic Actuated Modulating High Performance Butterfly Valve With YTC Positioner
Quick Info
Design
Pneumatic Actuated Modulating High Performance Butterfly Valve
Body
ASTM A 216 Gr. WCB / A 351 Gr. CF8 / CF8M
Size Range
2" to 60"
Shaft
17-4PH
Disc.
ASTM A 351 Gr. CF8 / ..
$0.00
Ex Tax:$0.00
30-degree V port Control ball Valve Flange end Wafer End With Regulating Positioner
Description
TEKO V port ball valve is specially designed for control applications of various medium like liquids, pulp and steam.
Our ball valve is used for sticky and crystallizing mediums, because of cleaning function of metal..
$0.00
Ex Tax:$0.00
Weld End Gate Valve
Specifications
Material: A105; F5; F11; F22; 304; 304L; 316; 316L; LF2 etc
Size rating: NPS 2"~22"
Working Pressure: Class 150LB~600LB~900LB~1500LB3
Design Standard: ANSI, B16.34, API600, API602
Face to face Standard: ASME B16.10
Butt weld end Standard: ASME B16.25
Test Standard: API 598
Material List
N..
$0.00
Ex Tax:$0.00