Wafer Check Valve
API 594 Ductile Iron GGG40 Double Plate Wafer Check Valve For Water Applications
Dual plate check valve with low pressure loss. Spring loaded for clean fluids. Water and other non-particle media. The Valve is shut tight at low pressures and should be mounted in between flanges.
Dual Plate Wafer Check valve PN 10/16
Type: F..
$0.00
Ex Tax:$0.00
Quick Action Single Plate Tilting Wafer Type Swing Check Valve
Introduction
The Check Tilting Disk Check Valve is a cost-effective valve with a unique design that provides excellent tightness and minimizes water-hammering.
Features of Tilting-disc Wafer Check Valves:
One Piece Body Design
Short Face-to-face
Inline Ti..
$0.00
Ex Tax:$0.00
Quick Closing Pistion Lift Type Wafer Check Valve, Wafer Poppet Valve
Quick Info
Size:2~40"(DN50~DN1000)
Rating:150~2500LB (PN16~PN420)
Body Materials:Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel
End Connection: Wafer
Design & Manufacturing Standard:BS1868,ASME B16.34
Structure Length Size:ASME B16.10,EN558
Flang..
$0.00
Ex Tax:$0.00
No Water Slam Short Pattern SS Metal Seat Swing Check Valve Wafer
Application:
Wafer Swing Check Valve is used for pipes under following conditions: nominal pressure 1.0 Mpa-42.0 Mpa, Class150~2500; nominal size DN15~1200mm; working temperature: -195~540℃. Applying different materials, it can be used for water, steam, oil, nitric ..
$0.00
Ex Tax:$0.00
No-Slam Stainless Steel Single Plate Wafer Swing Check Valve With Quick Reaction
Application:
Wafer Swing Check Valve is used for pipes under following conditions: nominal pressure 1.0 Mpa-42.0 Mpa, Class150~2500; nominal size DN15~1200mm; working temperature: -195~540℃. Applying different materials, it can be used for wat..
$0.00
Ex Tax:$0.00
Investment Cast Stainless Steel Spring Loaded Wafer Type Non Slam Check Valve
Teko produces Disc Check Valve in Wafer Construction having spring loaded disc. Being flangeless and sandwich type single disc spring loaded check vale allows them to be installed between any flanges of different standard and in any position; including vertical p..
$0.00
Ex Tax:$0.00
High CV Stainless Steel Quick Action Spring Loaded Wafer Single Door Check Valve
Application
Spring loaded check valve: A valve that slides along the centerline of the valve body. Pipeline check valve is a new type of valve. It is small in size, light in weight and good in processability. It is one of the development d..
$0.00
Ex Tax:$0.00
Double Plate Flangeless API594 Standard Wafer Check Valve For Horizontal Vertical Install
Dual Plate Check Valve VS Full bodied Swing Check Valve
1. COST SAVING DESIGN
The dual plate check valves can be as little as one fifth the weight of the equivalent full-bodied swing check valve. This results in savings in initial co..
$0.00
Ex Tax:$0.00
API 6D Short Pattern High Rating 900Lb Lift Type Sandwich Wafer Check Valve
Wafer Type Check Valve has short face-to-face dimensions and low weight allows a simple space saving installation between the companion flanges.
The valves are suitable to mounting between weld neck or slip on type companion flanges of different standards.
The TEKO wafer..
$0.00
Ex Tax:$0.00
API 594 Standard Dual Plate Double Flanged Wafer Check Valve For WOG
Advantages of Dual Plate Check Valve Design
Dual plate design minimizes valve cracking pressure and reduces valve pressure drop.
Spring loading on plats assists valve closing to ensure tight seal and minimize slamming
Pin retaining plugs fitted with graphite gaskets for fire..
$0.00
Ex Tax:$0.00
A216 WCB Body H76H Metal Seated Short Pattern Dual Disc Wafer Check Valve With Long Lifespan
Description
Wafer-type Dual-plate check valves for sandwiching between flanges, with springs for horizontal and vertical lines with upward flow. With special springs for downward flow. Self-centering valve body. Applications: for liquids, gases an..
$0.00
Ex Tax:$0.00
Stainless Steel Wafer Type Short Pattern Single Door Water Check Valve
Standard Features:
· Investment Casting Body
· Flange Standard:DIN PN10-40
· Viton Sealing and Metal Sealing Available
· Material:CF8M/CF8/SS316/SS304/1.4408/1.4301
· Max working temperature: 400 ℃
· Working Medium:Water,Oil,Gas ect.
· Inspection&Test..
$0.00
Ex Tax:$0.00
Simple Design Quick Action Maintenance Free API 594 Spring Duo Disc Wafer Check Valve
The retainless design means that they do not drill completely through the body of the valve to enable installation of the hinge-pin and stop-pin of a dual-plate check. Instead of drilling through, they machine out a recess.
Dual plate check valve with re..
$0.00
Ex Tax:$0.00
Vertical Upstream Installation Single Check Wafer Check Valve With Short Length
Description
The main difference between standard swing check valves and wafer type swing check valves is that the wafer types do not have the full-bodied arrangement. When the valve opens, the disc is forced into the top of the pipeline. Due to..
$0.00
Ex Tax:$0.00
Duo Check Retainerless Design High Pressure Wafer Check Valve
TEKO dual check valve are available in the sizes, pressure classes and configurations you need to meet the most demanding of applications. Our product range includes, but is not limited to:
Sizes: 2" to 36"
ASME Pressure Class 125 through 1500
API 6A and 6D pressure..
$0.00
Ex Tax:$0.00