Categories
-
Industrial Valve (398)
+-
- Butterfly Valve (47)
- High Performance Butterfly Valve (33)
- Knife Gate Valve (48)
- Ball Valve (44)
- Check Valve (7)
- Flanges (3)
- Gate Valve (31)
- Globe Valve (23)
- PTFE Lining Valve (31)
- Safety Valve (13)
- Slurry Pinch Valve (36)
- Wafer Check Valve (33)
- Angle Seat Valve (7)
- Forged Steel Valve (26)
- JIS Stadnard Valve (16)
- Marine Valve (46) +-
- Pump (39) +-
Fabricated Carbon Steel WCB Bi-directional Seal Slurry Pinch Valve With Epoxy Coating
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Fabricated Carbon Steel WCB Bi-directional Seal Slurry Pinch Valve With Epoxy Coating
Product Review
Our Carbon Steel Pinch Valve is an economical valve to be used as an control valve to release or block the fluid in the pipeline. The rubber sleeve provides an totally different solution from the metal material valves. With the elasticity and abrasion ability, it can control the most severe media that going through it.
Features
- Full bore and no clogging
- Self cleaning
- Fast closing / opening
- Only the sleeve contact with the fluid, Only the sleeve is easy-wearing part
- Low & Easy maintenance, simple to replace a new sleeve on site.
- Open and close body for options
- Bi-directional seal, Tight shut-off even with small trapped solids
Services
•Power plant, Coal coking plant | •Coal Washery | •Wastewater treatment | •Steel Corporation |
•Orel Mine | •Chemical Industry | •Aluminum Company | •Corrosive Liquid |
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Copyright © 2016 Teko Industry Co., Limited