Handmade NR EPDM High Pressure PN 40 Spare Sleeves For FLOROX Pinch Valve
- Availability: In Stock
- Product Model: GJ41X
Handmade NR EPDM High Pressure PN 40 Spare Sleeves For FLOROX Pinch Valve
Main Specifications
|
Diameter ranges |
From 15mm to 1000mm |
|
Connection to the pipe |
Bead end, Flange, Screwed, Slip-on, Socket |
|
Sleeve material |
Chlorobutyl (CIIR), EPDM, Hypalon® (CSM), Natural rubber (NR), Neoprene (CR), Nitrile (NBR), Polyurethane (PU), SBRT, Viton (FPM) |
|
Temperature range |
From -50ºc up to +160ºC - (Depending on material) |
|
Pressure range |
From -1 up to 100 bar - (Depending on material) |
Sleeve Type:
-Full port: the sleeve diameter remains constant from inlet to outlet port.
-Double Wall: This wall gives more protection at cost effective and simple design for highly abrasive applications.
-Cone: design for control applications. By reducing the center section of the valve sleeve, it is possible to achieve the required flow coefficient (Cv, Kv) of the valve.
-Reduced Port: as cone sleeve, the flow coefficient of the valve fits control application.
-Variable orifices: These orifices are designed for high-turndown control application. They also help avoid cavitation.
Sleeve Structure
Opening Tag: Ensure reliable operation, especially when valve in negative pressure conditions or closed for a long time.
Outer layer: Protect the sleeve
Reinforcement cords: gives the sleeve its pressure retaining capabilities
Inner layer: resistant to wear and chemicals